AL7210 7.2G 10W

AL7210 7.2G 10W is an analog FPV video transmitter in the 6110–7210 MHz range, listed with 10 W maximum output power. Its published input voltage is 9–36 V. Compare exact channels, connectors and system requirements before pairing equipment.

Frequency range6110–7210 MHz
Output power10 W
Input voltage9–36 V
Product familyFPV VTX
Enquire about this model→
PRODUCT DATA

Specifications at a glance.

Use these values to narrow your selection. Confirm the current hardware configuration and exact channel table with VYRLUME.

Compare the Shrimp B AL7210 7.2G 10W analog FPV video transmitter VTX against your aircraft and ground equipment. The 7.2G model is listed for 6110–7210 MHz and 10 W maximum RF output power. Its published channel count is 64. The listed control protocol is IRC Tramp. Check the exact channel table, video interface, supply and installation dimensions before ordering; the band name or power rating alone cannot establish link compatibility. Compare FPV video transmitters →

ProductAL7210 7.2G 10W
TypeAnalog video transmitter
Frequency range6110–7210 MHz
Output power10 W
Input voltage9–36 V
BrandShrimp B
Channels64
Selectable powerPIT / 1 W / 2.5 W / 5 W / 7.5 W / 10 W
Control protocolIRC Tramp
Dimensions66 × 37 × 16 mm
Weight48 g
A shared band name alone does not confirm compatibility. Compare exact channels, video format and connections before installation.
INSTALLATION CHECKS

Connect. Configure. Check.

01Match frequency with the other end of the link.
02Confirm supply voltage and polarity.
03Check antenna and video interfaces.
04Allow for mounting and cooling.
PRODUCT FAQ

Questions about AL7210 7.2G 10W.

Published specifications for this model, with the key checks to make before installation.

01What frequency range does AL7210 7.2G 10W use?

AL7210 7.2G 10W is listed for 6110–7210 MHz. The published specification lists 64 channels. Match the exact channel frequency and video format with the other end of the link before installation.

02What output power does AL7210 7.2G 10W offer?

The published selectable settings are PIT / 1 W / 2.5 W / 5 W / 7.5 W / 10 W. The model is listed at up to 10 W; check the setting, cooling and applicable local rules for your setup.

03What input voltage does AL7210 7.2G 10W require?

The published input range is 9–36 V. Confirm polarity and the power supply's capacity before connecting the unit.

04Which connections should I check for AL7210 7.2G 10W?

The published control protocol is IRC Tramp. Verify the matching wiring, connector and antenna frequency range for your setup.

05What space should I allow for AL7210 7.2G 10W?

The listed dimensions are 66 × 37 × 16 mm. The listed weight is 48 g. Allow clearance for cables, the antenna and cooling airflow.

06What should I verify before installing AL7210 7.2G 10W?

Check the exact channel table, video and antenna connections, supply polarity, mounting clearance and cooling requirements for the current hardware revision.

START A CONVERSATION

Discuss AL7210 7.2G 10W.

Discuss a catalogue model or contract manufacturing brief. Share your setup, quantity and timing.

Make an enquiry→