VYRLUME / VIDEO TRANSMISSION

Long-range FPV

Explore how an analog FPV video link is planned for mountain and coastal flights, from camera and VTX selection to receiver channels and antenna placement.

THE APPLICATION

How the setup comes together.

01

The challenge

A lighter aircraft and more usable video feedback as reception weakens.

02

The proposed setup

AKK TX5000AC on a 7-inch or 10-inch aircraft, with a directional ground antenna.

03

Reported experience

The source case reports a 30 km line-of-sight link; results depend on the full system and conditions.

THE VIDEO CHAIN

From camera to display.

Each component affects the complete analog FPV video link. Check the interfaces and operating requirements at every step before choosing equipment for long-range fpv.

STEP 01

Onboard camera

Choose an analog camera that provides the video signal required by the transmitter. Check its power needs, connector and image in the lighting expected along the route.

STEP 02

Video transmitter

The AKK TX5000AC carries the camera feed from the aircraft. Check its 14.6–28 V input range, selected output setting, antenna connection, mounting position and cooling.

STEP 03

Ground receiver

Match the exact channel frequency to the transmitter and choose an antenna arrangement for the planned line of sight. Terrain, aircraft orientation and interference can change reception.

STEP 04

Monitor or goggles

Connect the receiver to a compatible analog display. Verify the picture, channel selection and antenna connections on the ground before committing to a longer flight.

AKK TX5000AC analog FPV transmitter product photograph
RELATED PRODUCT

AKK TX5000AC

4900–6060 MHz · 5 W · 14.6–28 V. Explore the product details and compare them with the complete system.

View product→
APPLICATION FAQ

Questions about Long-range FPV.

Practical answers about equipment selection, compatibility and the limits of this example setup.

01What determines the usable range of an analog FPV video link?

Range depends on the complete link: transmitter setting, antenna placement and orientation, receiver, line of sight, terrain and interference. A power rating alone cannot predict a flight distance.

02Can the AKK TX5000AC work with any receiver in the same band?

No. Compare the exact frequency and channel tables, video format and antenna connections of both devices before pairing them.

03What power supply does the AKK TX5000AC need?

Its published input range is 14.6–28 V. Confirm the aircraft supply, polarity and available current against the current product documentation.

04Is the reported 30 km link a guaranteed range?

No. The cited case reports a 30 km line-of-sight result for one system and set of conditions. It is an example, not a guaranteed performance figure for other aircraft or locations.

START A CONVERSATION

Discuss your long-range fpv project.

Discuss a catalogue model or contract manufacturing brief. Share your setup, quantity and timing.

Make an enquiry→